1-4
Chapter 1: Product Introduction
1.3 Assembling the monitor
To assemble the monitor:
• While assembling the monitor arm/base, we recommend
that you keep the monitor inside its EPS (Expanded
Polystyrene) packaging.
1. Hold the neck with both hands. Gently attach the neck to the VESA
mount area until the latch locks the neck.
2. Gently attach the base to the stand. Fix the base to the stand by
fastening the bundled screw.
3. Remove the monitor from its EPS packaging. Adjust the monitor to
the angle that is most comfortable for you.
1
2 3
4 5
1
2
*Base screw size: M6 x 15mm
To Next Page
Loading...
