3-8
Chapter 3: General Instruction
• USB Setup: Turn On/Off USB Hub function during the standby
mode.
• Power Indicator: Turn the power LED indicator on/off.
• Power Key Lock: To disable / enable power key
• Key Lock: Disable all key functions. Pressing the down button for
more than five seconds to disable key lock function.
• Power Setting: Use to select Standard Mode or Power Saving
Mode.
• OSD Setup: Adjusts the OSD Position, OSD Timeout,
Transparency, and DDC/CI of the OSD screen.
• DisplayPort Stream: Select DisplayPort 1.1 or DisplayPort 1.2 if
your graphics card is not compatible with DisplayPort 1.4.
• DSC Support: DisplayPort Display Stream Compression.
• Information: Displays the monitor information.
• All Reset: Selects “Yes” to revert all settings to the factory default
mode.
To Next Page
Loading...
