Asus ROG STRIX XG49WCR - Monitor Introduction; Front;Side View

1-6
Chapter 1: Product Introduction
1.5 Monitor introduction
1.5.1 Front/Side view
Use the control button on the bottom of the monitor to adjust the monitor
settings.
Overclocking
GamePlus
GameVisual
Shadow Boost
MOVE/ENTER
BACK
EXIT
Image
Input Select
System Setup
MyFavorite
Color
Gaming
PIP/PBP Setup
Racing Mode
DisplayPort 3840x2160 120Hz
ROG Swift PG42UQ HDR OFF
Adaptive-Sync
1. Power Indicator:
Thecolordenitionofthepowerindicatorisasthebelowtable.
Status
Description
White ON (Power Setting is Standard mode.)
Amber Standby mode (Power Setting is Standard Mode.)
OFF OFF
Standby mode (Power Setting is Power Saving Mode.)
2. Power Button:
• Press this button to turn the monitor off. Press any key to turn on
the monitor.
3. (5-way) Button:
• Press this button to turn on the OSD menu.
• Increases/Decreases values or moves your selection up/down/
left/right
4. Close Button:
• Exit the OSD menu.