Asus ROG STRIX Z370-E GAMING - Page 93

ASUS ROG STRIX Z370-E GAMING
4-7
Chapter 4
CreatingaRAIDset
TocreateaRAIDset:
1. Fromtheutilitymainmenu,select1.CreateRAIDVolumeandpress<Enter>.The
followingscreenappears:
2. EnteranamefortheRAIDsetandpress<Enter>.
3. WhentheRAIDLevelitemisselected,presstheup/downarrowkeytoselectaRAID
leveltocreate,andthenpress<Enter>.
4. WhentheDisksitemisselected,press<Enter>toselecttheharddiskdrivesyouwant
toincludeintheRAIDset.TheSELECTDISKSscreenappears:
Enter a unique volume name that has no special characters
and is 16 characters or less.
[HELP]
Name: Volume 0
RAID Level: aaaaaaaaaaaaaaa
Disks: dssdsdsds
Strip Size:aaaaaaaaaaaaaaaa
Capacity:aaaaaaaaaaaaaa
Sync:aaaaaaaaaa
Create volume
[SELECT DISKS]
Port Device Model Serial # Size Status
0 ST3160812AS 9LS0HJA4 149.0GB Non-RAID Disk
1 ST3160812AS 9LS0F4HL 149.0GB Non-RAID Disk
2 ST3160812AS 3LS0JYL8 149.0GB Non-RAID Disk
3 ST3160812AS 9LS0BJ5H 149.0GB Non-RAID Disk
Select 2 to 6 to use in creating the volume.
[rt]-Prev/Next [SPACE]-SelectDisk [ENTER]-Done