3-20
Chapter 3: BIOS Setup
Chapter 3
3.7 Monitor menu
TheMonitormenudisplaysthesystemtemperature/powerstatus,andallowsyoutochange
thefansettings.
Qfan Configuration
Qfan Tuning
Clickthisitemtoautomaticallydetectthelowestspeedandconguretheminimum
dutycycleforeachfan.
AIO PUMP Control
[Disabled] DisabletheWaterPumpcontrolfeature.
[Auto] Detectsthetypeofwaterpumpinstalledandautomaticallyswitches
thecontrolmodes.
[DCmode] EnabletheWaterPumpcontrolinDCmodefor3-pinchassisfan.
[PWMmode] EnabletheWaterPumpcontrolinPWMmodefor4-pinchassisfan.
3.8 Boot menu
TheBootmenuitemsallowyoutochangethesystembootoptions.
Fast Boot
[Disabled] Allowsyoursystemtogobacktoitsnormalbootspeed.
[Enabled] Allowsyoursystemtoacceleratethebootspeed.
ThefollowingitemsappearonlywhenyousettheFast Bootto[Enabled].
Next Boot after AC Power Loss
[NormalBoot] ReturnstonormalbootonthenextbootafteranACpowerloss.
[FastBoot] AcceleratesthebootspeedonthenextbootafteranACpowerloss.
Boot Configuration
Setup Mode
[AdvancedMode] ThisitemallowsyoutogotoAdvancedModeoftheBIOSafter
POST.
[EZMode] ThisitemallowsyoutogotoEZModeoftheBIOSafterPOST.
CSM (Compatibility Support Module)
ThisitemallowsyoutoconguretheCSM(CompatibilitySupportModule)itemstofully
supportthevariousVGA,bootabledevicesandadd-ondevicesforbettercompatibility.
Launch CSM
[Auto] Thesystemautomaticallydetectsthebootabledevicesandtheadd-
ondevices.
[Enabled] Forbettercompatibility,enabletheCSMtofullysupportthenon-UEFI
driveradd-ondevicesortheWindows
®
UEFImode.
[Disabled] DisabletheCSMtofullysupportthenon-UEFIdriveradd-ondevices
ortheWindows
®
UEFImode.