Asus ROG STRIX Z390-H Gaming - Page 28

1-14
Chapter 1: Product Introduction
Chapter 1
2. Front panel audio connector (10-1 pin AAFP)
This connector is for a chassis-mounted front panel audio I/O module that supports HD
Audio. Connect one end of the front panel audio I/O module cable to this connector.
We recommend that you connect a high-denition front panel audio module to this
connector to avail of the motherboard’s high-denition audio capability.
®
ON
OFF
ROG STRIX Z390-H GAMING Analog front panel connector
AAFP
AGND NC SENSE1_RETUR SENSE2_RETUR
PORT1 L
PORT1 R PORT2 R
SENSE_SEND
PORT2 L
HD-audio-compliant
pin definition
3. USB 3.1 Gen1 connectors (20-1 pin U31G1_78, U31G1_910)
These connectors allow you to connect a USB 3.1 Gen1 module for additional USB 3.1
Gen1 front or rear panel ports. With an installed USB 3.1 Gen1 module, you can enjoy
all the benets of USB 3.1 Gen1 including faster data transfer speeds of up to 5 Gb/s,
faster charging time for USB-chargeable devices, optimized power efciency, and
backward compatibility with USB 2.0.
The USB 3.1 Gen1 module is purchased separately.
®
ON
OFF
ROG STRIX Z390-H GAMING USB 3.1 Gen 1 connectors
U31G1_78
PIN 1
Vbus
IntA_P1_SSRX-
IntA_P1_SSRX+
GND
IntA_P1_SSTX-
IntA_P1_SSTX+
GND
IntA_P1_D-
IntA_P1_D+
GND
Vbus
IntA_P2_SSRX-
IntA_P2_SSRX+
GND
IntA_P2_SSTX-
IntA_P2_SSTX+
GND
IntA_P2_D-
IntA_P2_D+
A
A
B
U31G1_910
PIN 1
GND
IntA_P1_D+
IntA_P1_D-
GND
IntA_P1_SSTX+
IntA_P1_SSTX-
GND
IntA_P1_SSRX+
IntA_P1_SSRX-
Vbus
IntA_P2_D+ IntA_P2_D- GND IntA_P2_SSTX+ IntA_P2_SSTX- GND IntA_P2_SSRX+ IntA_P2_SSRX- Vbus
B