ROG STRIX Z490-I GAMING
1-17
Chapter 1
14. Front Panel Audio header
The front panel audio header is for a chassis-mounted front panel audio I/O module
that supports HD Audio. Connect one end of the front panel audio I/O module cable to
this header.
We recommend that you connect a high-definition front panel audio module to this
connector to avail of the motherboard’s high-definition audio capability.
15. M.2 Heatsink Cover LED connector
The M.2 Heatsink Cover LED connector is for connecting the LED strips on your M.2
heatsink cover.
Be careful when connecting the M.2 heatsink cover to the M.2 Heatsink Cover LED
connector. Ensure the LED connector on the M.2 heatsink cover is aligned with the M.2
Heatsink Cover LED connector before installing the M.2 heatsink cover. Failure to do so
may cause damage to the connector pins.
To Next Page
Loading...
