vi
ROG STRIX Z490-I GAMING specifications summary
CPU
Intel
®
Socket LGA1200 for 10
th
Gen Intel
®
Core™, Pentium
®
Gold and
Celeron
®
processors*
Supports Intel
®
14 nm CPU
Supports Intel
®
Turbo Boost Technology 2.0 and Intel
®
Turbo Boost Max
Technology 3.0**
* Refer to www.asus.com for CPU support list.
** Intel
®
Turbo Boost Max Technology 3.0 support depends on the CPU types.
Chipset
Intel
®
Z490 Chipset
Memory
2 x DIMM, Max. 64GB, DDR4 4800(O.C) / 4600(O.C) / 4500(O.C) /
4400(O.C) / 4333(O.C) / 4266(O.C.) / 4133(O.C.) / 4000(O.C.) /
3866(O.C.) / 3733(O.C.) / 3600(O.C.) / 3466(O.C.) / 3400(O.C.) /
3200(O.C.) / 3000(O.C.) / 2933(O.C.) / 2800(O.C.) / 2666 / 2400 /
2133 MHz Non-ECC, Un-buffered Memory*
Dual Channel Memory Architecture
Supports Intel
®
Extreme Memory Profile (XMP)
OptiMem II
* 10
th
Gen Intel
®
Core™ i9/i7 CPUs support 2933/2800/2666/2400/2133 natively.
Refer to www.asus.com for the Memory QVL (Qualified Vendors Lists).
Graphics
1 x DisplayPort 1.4*
1 x HDMI™ 2.0a
* Support DisplayPort 1.4 with max. resolution of 4096 x 2304 @60Hz. Please
refer to www.intel.com for any update.
** Graphics specifications may vary between CPU types.
Expansion Slots
Intel
®
10
th
Gen Processors*
1 x PCIe 3.0 x16 slot (support x16)
* Support PCIe bifurcation for RAID on CPU function.
Storage
Total supports 2 x M.2 slots and 4 x SATA 6Gb/s ports
Intel
®
Z490 Chipset
M.2_1 slot (Key M), type 2242/2260/2280
(supports PCIe 3.0 x4 & SATA modes)
M.2_2 slot (Key M), type 2242/2260/2280
(supports PCIe 3.0 x4 & SATA modes)*
4 x SATA 6Gb/s ports*
Intel
®
Rapid Storage Technology supports Raid 0, 1, 5, 10
Intel
®
Optane™ Memory Ready
* When the M.2_2 Socket is operating in SATA mode, SATA port 2 will be
disabled.
Ethernet
1 x Intel
®
I225-V Ethernet
ASUS LANGuard
Wireless & Bluetooth
Intel
®
Wi-Fi 6 AX201
2x2 Wi-Fi 6 (802.11 a/b/g/n/ac/ax) support 1024QAM/OFDMA/MU-MIMO
Supports up to 2.4Gbps max data rate
Supports 2.4/5GHz Dual-Band
Supports channel bandwidth: HT20/HT40/HT80/HT160
Supports CNVI interface
Bluetooth v5.1*
* BT 5.1 function will be ready in Windows 10 build 19041 or later.
(continued on the next page)
To Next Page
Loading...
