Asus ROG Swift 360Hz PG259QN - Back View

1-3ASUS 360Hz PG259QN/PG259QNR Series LCD Monitor
4. button
• Default: GameVisual.
• To change the shortcut function, go to the Shortcut > Shortcut 2
menu.
• Turns on the OSD menu when the monitor enters standby mode or
displays the “NO SIGNAL“ message.
5. Power button/power indicator
• Turns the monitor on/off.
• The color definition of the power indicator is as the below table.
Status Description
White ON
OFF OFF
Yellow ULMB/ ULMB+HDR
Amber ashing Entering standby mode
Amber Standby mode/No signal
Green HDR/HDR+G-SYNC
Red G-SYNC
6. Ambient light sensor.
1.3.2 Back view
11
10
PG259QN
PG259QNR
4 5 86 9
4 5 86 7 9
1. DC IN port. This port connects the power cord.
2. HDMI port. This port is for connection with an HDMI compatible device.
3. DisplayPort. This port is for connection for a DisplayPort compatible device.
4. For service personnel only.
5. USB 3.0 upstream port. This port is for connection with a USB upstream
cable. The connection enables the USB ports on the monitor.
6. USB 3.0 downstream ports. These ports are for connection with USB
devices, such as USB keyboard/mouse, USB flash drive, etc.