3-8
Chapter 3: General Instruction
• USB Hub: Turn On/Off USB Hub function during the standby
mode.
• Power Indicator: Turn the power LED indicator on/off.
• Power Key Lock: To disable / enable power key
• Key Lock: Disable all key functions. Pressing the down button for
more than five seconds to disable key lock function.
• OSD Setup: Adjusts the OSD Timeout, DDC/CI, and
Transparency of the OSD screen.
• DisplayPort Ver.: Select DP 1.2 if your graphics card is not
compatible with DP 1.4.
• Information:Displays the monitor information.
• All Reset: Selects “Yes” to revert all settings to the factory default
mode.
To Next Page
Loading...
