89
3. Click Apply.
NOTE: The router will reboot when you change the modes.
4.7.2 System
The System page allows you to configure your wireless router
settings.
To set up the System settings:
1. From the navigation panel, go to Advanced Settings >
Administration > System tab.
2. You can configure the following settings:
• Change router login password: You can change the
password and login name for the wireless router by
entering a new name and password.
• Time Zone: Select the time zone for your network.
• NTP Server: The wireless router can access a NTP
(Network time Protocol) server in order to synchronize the
time.
• Enable Telnet: Click Yes to enable Telnet services on the
network. Click No to disable Telnet.
• Authentication Method: You can select HTTP, HTTPS, or
both protocols to secure router access.
• Enable Web Access from WAN: Select Yes to allow
devices outside the network to access the wireless router
GUI settings. Select No to to prevent access.
To Next Page
Loading...
