EasyManuals Logo

Asus RT-ACRH18 User Manual

Asus RT-ACRH18
2 pages
To Next Page IconTo Next Page
To Next Page IconTo Next Page
Page #1 background imageLoading...
Page #1 background image
RT-ACRH18
Dual band AC WiFi Router
Quick
Start Guide
Package contents
A quick look at RT-ACRH18
RT-ACRH18 Wireless Router AC adapter
Network cable (RJ-45) Quick Start Guide
LAN LED Power (DCIN) port
WAN (Internet) LED Power switch
2.4GHz LED USB 3.0 port
5GHz LED WAN (Internet) port
Power LED LAN 1 ~ 4 ports
WPS button
NOTES:
Use only the adapter that came with your package. Using other
adapters may damage the device.
Specifications:
DC Power adapter DC Output: +12V with 2A current
Operating Temperature 0~40
o
C Storage 0~70
o
C
Operating Humidity 50~90% Storage 20~90%
For optimal wireless transmission between the wireless router and connected wireless devices, ensure that you:
Place the wireless router in a centralized area for a maximum wireless coverage for the network devices.
Keep the wireless router away from metal obstructions and away from direct sunlight.
Always update to the latest firmware. Visit the ASUS website at http://www.asus.com to get the latest firmware updates.
Position your wireless router
Preparing your modem
1. Unplug the power cable/DSL modem. If it has a
battery backup, remove the battery.
NOTE: If you are using DSL for Internet,
you will need your username/password
from your Internet Service Provider (ISP)
to properly configure the router.
Unplug
2. Connect your modem to the router with
the bundled network cable.
3. Power on your cable/DSL modem.
4. Check your cable/DSL modem LED lights
to ensure the connection is active.
Setting up your RT-ACRH18
2. The web GUI launches automatically when you open a web browser. If
it does not auto-launch, enter http://router.asus.com.
3. Log into the Web GUI. By default, the login username and password for
your wireless router’s Web GUI is admin.
4. Set up a password for your router to prevent unauthorized access.
Wall Power Outlet
Modem
LINE LAN RESET PWR
Laptop
Power
WAN
LAN
a
d
c
b
1. Plug your router into a power outlet and power it on.
Connect the network cable from your computer to a LAN
port on your router.
You can set up your RT-ACRH18 via wired or wireless connection.
A. Wired connection
1. Plug your router into a power outlet and power it
on.
B. Wireless connection
Wall Power Outlet
Modem
LINE LAN RESET PWR
Power
WAN
a
c
b
Laptop
Tablet
Smart phone
2. Connect to the network
with SSID shown on
the product label on the
back side of the router.
For better network
security, change to
a unique SSID and
assign a password.
ASUS router
Wi-Fi Name (SSID): ASUS_XX
* XX refers to the last
two digits of the
MAC address. You
can find it on the
label on the back of
your RT-ACRH18.

Questions and Answers:

Question and Answer IconNeed help?

Do you have a question about the Asus RT-ACRH18 and is the answer not in the manual?

Asus RT-ACRH18 Specifications

General IconGeneral
DSL WANNo
Ethernet WANYes
WAN connection typeRJ-45
Wi-Fi bandDual-band (2.4 GHz / 5 GHz)
Wi-Fi standards802.11a, 802.11b, 802.11g, Wi-Fi 4 (802.11n), Wi-Fi 5 (802.11ac)
Top Wi-Fi standardWi-Fi 5 (802.11ac)
WLAN data transfer rate (max)1300 Mbit/s
WLAN data transfer rate (first band)450 Mbit/s
VPN supportVPN Client L2TP VPN Client OVPN VPN Client PPTP VPN Server IPSec VPN Server OVPN VPN Server PPTP
Cabling technology10/100/1000Base-T(X)
Networking standardsIEEE 802.11a, IEEE 802.11ac, IEEE 802.11b, IEEE 802.11g, IEEE 802.11n
Ethernet LAN data rates10, 100, 1000 Mbit/s
Ethernet LAN interface typeGigabit Ethernet
Ethernet LAN (RJ-45) ports4
USB 3.2 Gen 1 (3.1 Gen 1) Type-A ports quantity1
Product typeTabletop router
Product colorBlack
LED indicatorsLAN, Power, WAN, WLAN
Cables includedLAN (RJ-45)
Antennas quantity3
Internal memory128 MB
Output current1.5 A
Output voltage12 V
AC input voltage110 - 240 V
Power source typeDC
AC input frequency50 - 60 Hz
Supported network protocolsIPv4, IPv6
Weight and Dimensions IconWeight and Dimensions
Weight467 g

Related product manuals