Asus SABERTOOTH 55i - Motherboard - ATX - Page 69

ASUS SABERTOOTH 55i 3-7
Chapter 3
Updating the BIOS le
To update the BIOS le using BIOS Updater
1. Visit the ASUS website at www.asus.com and download the latest BIOS le for the
motherboard. Save the BIOS le to a bootable oppy disk.
2. Copy BIOS Updater (
BUPDATER.EXE) from the motherboard support DVD to the
bootable oppy disk.
3. Boot the system in DOS mode, and then at the prompt type:
bupdater /pc /g
A:\>bupdater /pc /g
ASUSTek BIOS Updater for DOS V1.00b [09/06/22]
Current ROM
Update ROM
A:
Note
[Enter] Select or Load [Tab] Switch [V] Drive Info
[Up/Down/Home/End] Move [B] Backup [Esc] Exit
P7P55D.ROM 2097152 2009-08-06 17:30:48
FLASH TYPE: MXIC 25L1605A
PATH: A:\
BOARD: SABERTOOTH 55i
VER: 0301
DATE: 07/30/2009
BOARD: Unknown
VER: Unknown
DATE: Unknown
4. The BIOS Updater screen appears as below.
6. Select Yes and press <Enter>. When BIOS update is done, press <ESC> to exit BIOS
Updater. Restart your computer.
DO NOT shut down or reset the system while updating the BIOS to prevent system boot failure!
• For BIOS Updater version 1.04 or later, the utility automatically exits to the DOS
prompt after updating BIOS.
• Ensure to load the BIOS default settings to ensure system compatibility and stability.
Select the Load Setup Defaults item under the Exit BIOS menu. See Chaper 3 of
your motherboard user manual for details.
5. Use the <Up/Down/Home/End> keys to select the BIOS le and press <Enter>. BIOS
Updater checks the selected BIOS le and prompts you to conrm BIOS update.
Are you sure to update BIOS?
Yes No