Asus SABERTOOTH 990FX/GEN3 R2.0 - Mylogo2

ASUS SABERTOOTH 990FX/GEN3 R2.0
4-37
Chapter 4
4.3.12 MyLogo2
MyLogo2 allows you to customize the boot logo, which is the image that appears on the
screen during the Power On Self Tests (POST).
Launching ASUS Update
To launch MyLogo2, click Update > MyLogo on the AI Suite II main menu bar.
Using MyLogo
Select the option that you want to use to update your boot logo, click Next and follow the
instructions below.
Change the boot logo of a downloaded BIOS le and update (or do not update) this BIOS to
the motherboard
1. From the BIOS le eld, click Browse to locate the BIOS le.
2. From the Picture File eld, click Browse the image for your boot logo, then click Next.