Asus SABERTOOTH P67 - System Agent Configuration; PCH Configuration; SATA Configuration

3-16 Chapter 3: BIOS setup
Chapter 3
3.5.2 System Agent Conguration
Main
Ai Tweaker
Advanced Monitor Boot Tool
Exit
Select which graphics controller to
use as the primary boot device.
Back Advanced\ System Agent Conguration >
EFI BIOS Utility - Advanced Mode
System Agent Conguration
Initate Graphic Adapter PEG/PCI
3.5.3 PCH Conguration
Main
Ai Tweaker
Advanced Monitor Boot Tool
Exit
Enabled/Disabled the High Precision
Event Timer.
Back Advanced\ PCH Conguration >
EFI BIOS Utility - Advanced Mode
PCH Conguration
High Precision Timer Enabled
Initiate Graphic Adapter [PEG/PCI]
Allows you to decide which graphics controller to use as the primary boot device.
Conguration options: [PCI/PEG] [PEG/PCI]
High Precision Timer [Enabled]
Allows you to enable or disable the High Precision Event Timer.
Conguration options: [Enabled] [Disabled]
3.5.4 SATA Conguration
While entering Setup, the BIOS automatically detects the presence of SATA devices. The SATA
Port items show Not Present if no SATA device is installed to the corresponding SATA port.
Main
Ai Tweaker
Advanced Monitor Boot Tool
Exit
(1) IDE Mode. (2) AHCI Mode. (3)
RAID Mode.
Back Advanced\ SATA Conguration >
EFI BIOS Utility - Advanced Mode
SATA Conguration
SATA Mode AHCI Mode
S.M.A.R.T. Status Check Enabled
SATA 6G_1 (Brown) Not Present
SATA 6G_2 (Brown) Not Present
SATA 3G_3 (Black) ASUS CB-521 ATAPI
SATA 3G_4 (Black) Not Present
SATA 3G_5 (Black) Not Present
SATA 3G_6 (Black) Not Present