Asus SABERTOOTH X79 - Page 73

ASUS SABERTOOTH X79 3-11
Chapter 3
others
DRAM CLK Period [Auto]
Conguration options: [Auto] [1 DRAM Clock] – [8 DRAM Clock]
Enhanced Training (CHA/B/C/D) [Auto]
Conguration options: [Auto] [Disabled] [Enabled]
MCH Duty Sense (CHA/B/C/D) [Auto]
Conguration options: [Auto] [0 DRAM Clock] – [31 DRAM Clock]
MCH Recheck [Auto]
Conguration options: [Auto] [Disabled] [Enabled]
DIGI+ Power Control
Do not remove the thermal module while changing the DIGI+ Power Control related
parameters . The thermal conditions should be monitored.
Some of the following items are adjusted by typing the desired values using the numeric
keypad and press the <Enter> key. You can also use the <+> and <-> keys to adjust the
value. To restore the default setting, type [auto] using the keyboard and press the <Enter>
key.
CPU Load-Line Calibration [Auto]
CPU Load-line is dened by Intel VRM spec and affects CPU voltage. The CPU
working voltage will decrease proportionally to CPU loading. Higher load-line
calibration would get higher voltage and better overclocking performance, but increase
the CPU and VRM thermal. This item allows you to adjust the voltage range from the
following percentages to boost the system performance: 0% (Regular), 25% (Medium),
50% (High), 75% (Ultra High) and 100% (Extreme).
Conguration options: [Auto] [Regular] [Medium] [High] [Ultra High] [Extreme]