Asus Sabertooth X99 - Page 95

ASUS SABERTOOTH X99
3-25
Chapter 3
Receiver CLK De-emphasis [Auto]
Conguration options: [Auto] [1.00] - [1.60]
Transmitter CLK De-emphasis [Auto]
Conguration options: [Auto] [1.00] - [1.60]
Receiver CTL Pre-emphasis [Auto]
Conguration options: [Auto] [1.00] - [1.60]
Receiver CTL De-emphasis [Auto]
Conguration options: [Auto] [1.00] - [1.60]
Transmitter CTL De-emphasis [Auto]
Conguration options: [Auto] [1.00] - [1.60]
Receiver ODT Pre-emphasis [Auto]
Conguration options: [Auto] [1.00] - [1.60]
Receiver ODT De-emphasis [Auto]
Conguration options: [Auto] [1.00] - [1.60]
Transmitter ODT De-emphasis [Auto]
Conguration options: [Auto] [1.00] - [1.60]
MISC
DRAM Eventual Voltage (CHA/CHB/CHC/CHD) [Auto]
Use <+> or <-> to adjust the eventual voltages of the DIMM slots. The values range
from 0.8 V to 1.9 V with a 0.10 increment.
DRAM CLK Period [Auto]
This item allows you to set a DRAM clock period.
Conguration options: [Auto] [1] – [19]
Memory Optimize Control [Auto]
This item allows you to optimize the memory control.
Conguration options: [Auto] [Enabled] [Disabled]
Enhanced Training (CHA/CHB/CHC/CHD) [Auto]
Conguration options: [Auto] [Enabled] [Disabled]
MemTest [Auto]
This item allows you to enable or disable the memory testing.
Conguration options: [Enabled] [Disabled]
Attempt Fast Boot [Auto]
This item allows the portion of the memory reference code to be skipped when possible
to increase boot speed.
Conguration options: [Auto] [Enabled] [Disabled]
Attempt Fast Cold Boot [Auto]
This item allows the portion of the memory reference code to be skipped when possible
to increase boot speed.
Conguration options: [Auto] [Enabled] [Disabled]