2-2
Chapter 2: Basic Installation
Chapter 2
6. Launch the Thermal Radar 2 utility on your computer to adjust the fan’s behavior.
4. Align and insert the cover lid and the assistant fan assembly into the IO Cover and
secure it with the screw that you removed in step 1.
Fan cable corner slot
Ensure to tuck the fan cable inside the cable corner slot.
5. Connect the fan cable connector to the assistant fan (ASST_FAN1) header on the
motherboard.
For more information about the Thermal Radar 2 utility, refer to Chapter 4: Software
Support.
To Next Page
Loading...
