SABERTOOTH Z170 S
2-17
Chapter 2
• USB 3.1/3.0 devices can only be used as data storage only.
• We strongly recommend that you connect your devices to ports with matching data
transfer rate. Please connect your USB 3.0 devices to USB 3.0 ports and your USB
3.1 devices to USB 3.1 ports for faster and better performance for your devices.
• All USB devices connected to the USB 2.0 and USB 3.0 ports are controlled by the
xHCI controller. Some legacy USB devices must update their rmware for better
compatibility.
* LAN ports LED indications
ACT/LINK
LED
SPEED
LED
LAN port
Activity Link LED Speed LED
Status Description Status Description
Off
No link
Off 10 Mbps connection
Orange
Linked
Orange 100 Mbps connection
Orange (Blinking)
Data activity
Green 1 Gbps connection
Orange (Blinking
then steady)
Ready to wake up
from S5 mode
** Audio 2, 4, 6, or 8-channel configuration
Port
Headset
2-channel
4-channel 6-channel 8-channel
Light Blue Line In Line In Line In
Line In or side
speaker
Lime Line Out Front Speaker Out Front Speaker Out Front Speaker Out
Pink Mic In Mic In Mic In Mic In
Orange – – Center/Subwoofer Center/Subwoofer
Black – Rear Speaker Out Rear Speaker Out Rear Speaker Out
To Next Page
Loading...
