Asus STRIX Z270G GAMING - Creating a RAID Driver Disk for Windows

4-10
Chapter 4: RAID Support
Chapter 4
Exiting the Intel
®
Rapid Storage Technology Option ROM utility
To exit the utility:
1. Fromtheutilitymainmenu,select5. Exit,andthenpress<Enter>.Thefollowing
warningmessageappears:
Are you sure you want to exit? (Y/N):
[CONFIRM EXIT]
2. Press<Y>toexitorpress<N>toreturntotheutilitymainmenu.
4.2 Creating a RAID driver disk
4.2.1 Creating a RAID driver disk in Windows
®
To install the RAID driver for Windows
®
OS:
1. DuringtheOSinstallation,clickLoad Driver to allow you to select the installation
mediacontainingtheRAIDdriver.
2. InsertthesupportUSBdrivewithRAIDdriverintotheUSBport,andthenclick
Browse.
3. Clickthenameofthedeviceyouveinserted,gotoDrivers > RAID, and then select
theRAIDdriverforthecorrespondingOSversion.ClickOK.
4. Followthesucceedingscreeninstructionstocompletetheinstallation.
To set up a Windows
®
UEFIoperatingsystemunderRAIDmode,ensuretoloadtheUEFI
driverforyouropticaldrive.