Installation
IMPORTANT! Refer to the system user guide for installation details and
other system information.
Removing the cover
1. Locate and remove three
cover screws.
A
A
B
2. Pull the cover toward the rear
panel (A), then lift (B).
Lifting the power supply unit
1. Locate and remove two
screws.
2. Lift the PSU in the direction of
the arrow to a 90º angle.
1
1
2
Installing the CPU
IMPORTANT! Before
installing the CPU, remove
the two rubbers (A and B)
attached to the bottom of
the cooler / fan.
A
B
To Next Page
Loading...
