Asus TUF GAMING Z490-PLUS WI-FI User Manual

TUF GAMING Z490-PLUS (WI-FI)
1-1
Chapter 1
Product Introduction
1
Chapter 1: Product Introduction
• Unplug the power cord from the wall socket before touching any component.
• Before handling components, use a grounded wrist strap or touch a safely grounded
object or a metal object, such as the power supply case, to avoid damaging them due
to static electricity.
• Hold components by the edges to avoid touching the ICs on them.
• Whenever you uninstall any component, place it on a grounded antistatic pad or in
the bag that came with the component.
• Before you install or remove any component, ensure that the ATX power supply is
switched off or the power cord is detached from the power supply. Failure to do so
may cause severe damage to the motherboard, peripherals, or components.
1.1 Before you proceed
Take note of the following precautions before you install motherboard components or
change any motherboard settings.

Asus TUF GAMING Z490-PLUS WI-FI Specifications

General

Chipset	Intel Z490
CPU Socket	LGA 1200
Memory Type	DDR4
Memory Slots	4
Maximum Memory	128GB
Form Factor	ATX
Wi-Fi	Wi-Fi 6 (802.11ax)
Bluetooth	Bluetooth 5.1
PCIe x16 Slots	2
PCIe x1 Slots	3
SATA Ports	6
M.2 Slots	2
Ethernet	Intel I225-V 2.5Gb Ethernet
Audio	Realtek ALC S1200A
RGB Support	Aura Sync
Memory Speed	4600MHz (OC)
USB Ports	6 x USB 3.2 Gen 1, 6 x USB 2.0