TUF GAMING Z490-PLUS (WI-FI)
1-15
Chapter 1
10. USB 2.0 header
Connect the USB module cable to these connectors, then install the module to a slot
opening at the front of the system chassis. These USB headers comply with USB 2.0
specifications and support up to 480 Mbps connection speed.
USB1112
USB+5V
USB_P1-
USB_P1+
GND
NC
USB+5V
USB_P2-
USB_P2+
GND
PIN 1
A
B
A
B
USB6
PIN 1
USB+5V
USB_P6-
USB_P6+
GND
DO NOT connect a 1394 cable to the USB connectors. Doing so will damage the
motherboard!
The USB 2.0 module is purchased separately.
To Next Page
Loading...
