Motherboard User Manual
2-5
Chapter 2
3. (optional) If required, remove the pre-installed removable M.2 Q-Latch screw at the
2280 length screw hole.
Only follow this step if a removable M.2 Q-Latch screw is pre-installed at the 2280 length
screw hole and can be removed.
OPTIONAL
Bundled rubber for M.2
OR remove the M.2 rubber.
Only follow this step if installing a 2242 length M.2 module and the M.2 slot has an M.2
rubber pre-installed.
4. (optional) Install the bundled rubber for M.2 if you are installing a single sided M.2
module. DO NOT install the bundled rubber for M.2 when installing a double-sided
M.2 module. The rubber installed by default is compatible with double sided M.2
modules.
Only follow this step if installing a 22110 or 2280 length M.2 module and when the rubber
for M.2 comes bundled with your motherboard package.
To Next Page
Loading...
