2-3
Chapter 2: Setup
2.4 Connecting the cables
Connect the cables as the following instructions:
HDMI-2 VGA
EAR
PHONE
HDMI-1
• To connect the power cord: Connect one end of the power cord
securely to the monitor’s AC input port, the other end to a power outlet.
• To connect the VGA/HDMI cable:
1. Press this button to display the OSD menu when the OSD is off.
2. Enters the OSD menu.
3. Toggles the Key Lock function between on and off with a long
press for 5 seconds.
• To use the earphone: connect the end with plug type to the monitor’s
earphone jack when an HDMI signal is fed.
2.5 Turning on the monitor
Press the power button . See page 1-2 for the location of the power
button. The power indicator lights up in white to show that the monitor is
ON.
To Next Page
Loading...
