Asus VA32U Series - 2.2 Detaching the arm;base (for VESA wall mount)

2-2
Chapter 2: Setup
2.2 Detaching the arm/base
(for VESA wall mount)
The detachable arm/base of this monitor is specially designed for VESA wall mount.
To detach the arm/base:
1. Have the front of the monitor face down on a table.(Figure 1)
2. Remove the base (Figure 2).
3. Use a screwdriver to remove the screw(s) on the hinge (Figure 3), then
remove the hinge.
1
2
2
1
(
Figure 1
) (
Figure 2
) (
Figure 3
)
We recommend that you cover the table surface with soft cloth to prevent
damage to the monitor.
• The VESA wall mount kit (100 x 100 mm) is purchased separately.
• Use only the UL Listed Wall Mount Bracket with minimum weight/load
22.7kg (Screw size: M4 x 12 mm)