Asus VE248 Series - Image Adjustments; Color Settings

3-2 Chapter3:GeneralInstruction
2. Image
Youcanadjustbrightness,contrast,
sharpness,saturation,position(VGAonly),
andfocus(VGAonly)fromthismenu.
• Brightness: the adjusting range is from 0 to 100. isahotkeyto
activate this function.
• Contrast: the adjusting range is from 0 to 100.
• ASCR:turnson/offtheASCR(ASUSSmartContrastRatio)function.
• Sharpness: the adjusting range is from 0 to 100.
• Saturation: the adjusting range is from 0 to 100.
• Position:adjuststhehorizontalposition(H-Position)andthevertical
position(V-Position)oftheimage.Theadjustingrangeisfrom0to100.
• Focus
:reducesHorizonal-linenoiseandVertical-linenoiseoftheimage
byadjusting(Phase)and(Clock)separately.Theadjustingrangeisfrom
0 to 100.
• Phaseadjuststhephaseofthepixelclocksignal.Withawrongphase
adjustment,thescreenshowshorizontaldisturbances.
• Clock(pixelfrequency)controlsthenumberofpixelsscannedbyone
horizontalsweep.Ifthefrequencyisnotcorrect,thescreenshowsvertical
stripes and the image is not proportional.
3. Color
Selecttheimagecoloryoulikefromthis
function.
• Color Temp.:containsfivecolormodesincludingCool,Normal,Warm,
sRGB,andUsermode.
• Skin Tone
:containsthreecolormodesincludingReddish,Natural,and
Yellowish.
IntheUsermode,colorsofR(Red),G(Green),andB(Blue)areuser-
configurable; the adjusting range is from 0-100.