Asus VG278 Series - Connecting Cables

2-5ASUS VG278 Series LCD Monitor
2.4 Connecting the cables
Connect the cables as the following instructions:
VG278QRVG278QF
 :
a. Connect the power adapter securely to the monitor’s DC input.
b. Connect one end of the power cord to the power adapter and the other
end to a power outlet.
 :
a. Plug one end of the DisplayPort/DVI/HDMI cable to the monitor’s
DisplayPort/DVI/HDMI port.
b. Connect the other end of the DisplayPort/DVI/HDMI cable to your
computer's DisplayPort/DVI/HDMI port.
c. Tighten the two screws to secure the DVI connector.
 connect one end of the audio cable to the
monitor’s Audio-in port, the other end to the computer’s audio-out port.
  connect the end with plug type to the monitor’s
earphone jack when an HDMI or DisplayPort signal is fed.