Asus VG279QM1A Series User Manual

3-12
Chapter 3: General Instructions
3.4 Troubleshooting(FAQ)
Problem Possible Solution
Power LED is not ON
• Press the button to check if the monitor
is in the ON mode.
• Check if the power cord is properly
connected to the monitor and the power
outlet.
The power LED lights amber and there is
no screen image
• Check if the monitor and the computer are
in the ON mode.
• Make sure the signal cable is properly
connected the monitor and the computer.
• Inspect the signal cable and make sure
none of the pins are bent.
• Connect the computer with another
available monitor to check if the computer
is properly working.
Screen image is too light or dark • Adjust the Contrast and Brightness
settings via OSD.
Screen image bounces or a wave pattern is
present in the image
• Make sure the signal cable is properly
connected to the monitor and the
computer.
• Move electrical devices that may cause
electrical interference.
Screen image has color defects (white does
not look white)
• Inspect the signal cable and make sure
that none of the pins are bent.
• Perform All Reset via OSD.
• Adjust the R/G/B color settings or select
the Color Temperature via OSD.

Asus VG279QM1A Series Specifications

General

Color	black
Screen Type	led
Tiltable	yes
Wall Mount	100mm x 100mm
Webcam	no
OS Compatibility	windows
Screen Size	27 inches
Panel Type	ips
Aspect Ratio	16:9
Resolution	1920 x 1080
Native Resolution	1920 x 1080
Refresh Rate	144hz
Horizontal Viewing Angle	178 degrees
Vertical Viewing Angle	178 degrees
Response Time	1 milliseconds
Brightness	400 candela per square meter
Contrast Ratio	100, 000, 000:1
Synchronization	freesync (amd adaptive sync)
HDR	no
Built-In Speakers	no
Interface Connectors	1 x displayport 1.2
HDMI Ports	1
Display Port Inputs	1
DVI	1
Headphones Output	yes
Power Consumption	40 watts
Depth with Stand	19.9 inches
Width with Stand	24.4 inches
Height with Stand	19.95 inches
Depth without Stand	19.9 inches
Height without Stand	8.3 inches
Net Weight without Stand	12.4 pounds