EasyManua.ls Logo

Asus VG279QR Series - Chapter 3: General Instructions; OSD Menu Navigation and Configuration

Asus VG279QR Series
30 pages
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Loading...
3-1ASUS TUF Gaming Monitor VG279 Series
3.1 OSD (On-Screen Display) menu
3.1.1 How to reconfigure
GameVisual
Scenery Mode
Racing Mode
Cinema Mode
RTS/RPG Mode
FPS Mode
sRGB Mode
MOBA Mode
TUF Gaming ASUS VG279
Racing Mode DisplayPort 1920x1080@ 65Hz
1. Press the ( ) button to activate the OSD menu.
2. Move the ( ) button up/down to navigate through the functions.
Highlight the desired function and press the ( ) button to activate it. If
the function selected has a sub-menu, move the ( ) button up/down
again to navigate through the sub-menu functions. Highlight the desired sub-
menu function and press the ( ) button or move the ( ) button
right to activate it.
3. Move the ( ) button up/down to change the settings of the selected
function.
4. To exit and save the OSD menu, press the button or move the
( ) left repeatedly until the OSD menu disappears. To adjust other
functions, repeat steps 1-3.
3.1.2 OSD function introduction
1. GameVisual
GameVisual
Scenery Mode
Racing Mode
Cinema Mode
RTS/RPG Mode
FPS Mode
sRGB Mode
MOBA Mode
TUF Gaming ASUS VG279
Racing Mode DisplayPort 1920x1080@ 65Hz
Please refer to “1.3.4 GameVisual Function”.

Related product manuals