1-3ASUS TUF Gaming Monitor VG27AQL3A series
• Displays the input selection menu when the monitor enters standby mode
or displays the “NO SIGNAL“ message.
5. Power button/power indicator
• Turns the monitor on/off.
• The color definition of the power indicator is as the below table.
Status Description
White ON
Amber Standby mode/No signal
OFF OFF
1.3.2 Back view
9
10
1. HDMI-1 port. This port is for connection with an HDMI compatible device.
2. HDMI-2 port. This port is for connection with an HDMI compatible
device.
3. DisplayPort. This port is for connection for a DisplayPort compatible device.
4. Earphone jack. This port is only available when an HDMI/DisplayPort cable
is connected.
5. USB 3.2 Gen 1 Type-B. This port is for connection with a USB upstream
cable. The connection enables the USB ports on the monitor.
6. USB 3.2 Gen 1 Type-A. These ports are for connection with USB devices,
such as USB keyboard/mouse, USB flash drive, etc.
7. AC-IN port. This port connects the power cord.
8. Kensington lock slot.
9. Control buttons.
10. Tripod screw hole.
To Next Page
Loading...
