To Next PageTo Next PageWhat to do if my Asus VG27WQ1B has power but no video?
If your Asus monitor's power LED is white but there's no video, try these troubleshooting steps: First, check if the power button works. If not, consider replacing the main board or the power board and its connection. Also, inspect the LVDS/FFC cable or panel and replace if necessary. Finally, try replacing the keyboard.
How to fix an Asus VG27WQ1B Monitor that has no power?
If your Asus monitor isn't powering on, try these steps: First, ensure the power cable is securely plugged in. Then, check that the power switch is turned on. Verify the LED indicator is working correctly. If these steps don't work, you may need to replace the power board, main board, or keyboard, checking connections each time.
General| Screen Size | 27 inches |
|---|---|
| Resolution | 2560 x 1440 (WQHD) |
| Panel Type | VA |
| Refresh Rate | 165Hz |
| Response Time | 1 ms (MPRT) |
| Aspect Ratio | 16:9 |
| Contrast Ratio | 3000:1 |
| Curvature | 1500R |
| Adaptive Sync | FreeSync Premium |
| VESA Mount | 100 x 100 mm |
| Viewing Angle | 178°/178° |
| Swivel | No |
| Pivot | No |
| Ports | DisplayPort 1.2, HDMI 2.0 |
| Color Support | 16.7M colors |
