Asus VT168 Series - Input Select

4-5
Chapter 4: General Instruction
Image
Sharpness
Aspect Control
VividPixel
ASCR
Focus
Auto Adjust
Position
Standard Mode VGA 1366x768@60Hz
ASUS VT168
S
• Sharpness:Adjustthepicturesharpness.Theadjustingrange
isfrom0to100.(Onlydisableforselecting“StandardMode”and
“sRGBMode”inSplendidmenu.)
• Aspect Control:Adjusttheaspectratioto“Full”,“1366x768”,
“1360x768”,“4:3”,“OverScan”(onlyforVT168H).
• VividPixel:ASUSExclusiveTechnologythatbringslifelike
visualsforcrystal-clearanddetail-orientedenjoyment.The
adjustingrangeisfrom0to100.
• ASCR:SelectONorOFFtoenableordisabledynamiccontrast
ratiofunction.(ASCR:ASUSSmartContrastRatio.Disabledat
“StandardMode”,“sRGBMode”and“ReadingMode.)
• Position:Adjustthehorizontalpostition(H-Position)andthe
verticalposition(V-Position)oftheimage.Theadjustingrangeis
from0to100.(OnlyavailableforVGAinput.)
• Focus:ReduceHorizonal-linenoiseandVertical-linenoiseof
theimagebyadjusting(Phase)and(Clock)separately.The
adjustingrangeisfrom0to100.(OnlyavailableforVGAinput.)
• Auto Adjust:Automaticallyadjusttheimagetoitsoptimized
position,clock,andphase.(OnlyavailableforVGAinput.)
4:3isonlyavailablewheninputsourceisin4:3format. OverScanis
onlyavailablefortheVT168H.
5. Input Select
SelecttheinputsourcefromVGA,DVI (only for VT168N),HDMI
(only for VT168H).