Asus WL-330GE Manual

Wi-Fi video surveillance system
Setting of Wi-Fi video surveillance using video server Tral 5.0 and wireless hot spot Asus WL-330gE.
Setting of wireless hot spot Asus WL-330gE.
Open hot spot control interface as shown in operation manual.
Switch operating mode to “Adapter”.
Select the desired network from the list of available ones and press
“Connect”. In the appeared window insert the parameters of
authorization in wireless network. Confirm information.
After hot spot has been restarted make sure it
connected to the selected wireless network
successfully. The appeared icon in the column
“Status” is the confirmation.
Setting of video server Tral 5.0
To gain access to Tral 5.0 settings carry out connection from the computer via LAN.
Tab System-Network
Activate DHCP acquisition of network settings.
Data exchange between the devices is performed in Ethernet interfaces.

Asus WL-330GE Specifications

General

Channels quantity	13 channels
Maximum data transfer rate	54 Mbit/s
Indoor range	130ft (40m)
Outdoor range	330ft (100m)
Compliance industry standards	IEEE802.11g, IEEE802.11b, IEEE802.11d, IEEE802.3, IEEE802.3u, IEEE802.1X, WPA, WMM, IPv4, IPv6
Antenna gain level (max)	1.25 dBi
Internal	No
Certification	Wi-Fi, WPA, WMM, UPnP IGD
DHCP client	Yes
Ethernet LAN (RJ-45) ports	1

Weight and Dimensions

Weight	62 g
Dimensions (WxDxH)	62 x 86 x 17 mm