Asus WS C422 PRO/SE - Page 30

1-14
Chapter 1: Product Introduction
Chapter 1
5. IPMI SW setting (3-pin IPMI_SW1)
ThisjumperallowsyoutoselectwhichprotocolintheGPUsensortofunction.
6. Baseboard Management Controller setting (3-pin BMC_EN1)
Thisjumperallowsyoutoenable(default)ordisableon-boardBMC.Ensuretosetthis
BMCjumpertoenabledtoavoidsystemfancontrolandhardwaremonitorerror.