Asus X510 Series User Manual

Disassembly Procedure
V1.0
2 - 1
Disassembly and Assembly
Please follow the information provided in this section to perform the
complete disassembly procedure of the notebook. Be sure to use proper
tools described before.
SUS X510 Series Notebook consists of various modules. This chapter describes the
procedure for the complete notebook disassembly and assembly (Assemble process please
look up from the last page). In addition, in between procedures, the detailed disassembly
(assembly) procedure of individual modules will be provided for your service needs.
The disassembly procedure consists of the following steps:
 Service overview
 Appropriate Tools
 Bottom Case Module
 HDD Module
 WLAN Module
 Battery Module
 SSD Module
 Thermal Assy & FAN Module
 Memory Module
 IO Board
 HDDBoard
 Motherboard Module
 Speaker Module
 Touchpad Module
 LCD Module
Chapter
2
A

Asus X510 Series Specifications

General

Display	15.6-inch, HD (1366x768) or Full HD (1920x1080)
RAM	DDR4
Storage	500GB/1TB HDD or 128GB/256GB SSD
Graphics	NVIDIA GeForce MX130
Operating System	Windows 10 Home
Weight	1.7 kg
Ports	1 x Type-C USB 3.0, 1 x USB 3.0 port(s) Type A, 2 x USB 2.0 port(s), 1 x HDMI, 1 x SD card reader
Wireless	Wi-Fi 802.11ac, Bluetooth
Audio	built-in speakers, microphone
Power Adapter	45W
Processor	Intel Core i3/i5/i7

Summary

Service Overview and Precautions

Precautions

Important safety and handling guidelines before performing any service or repair on the notebook.

Screw Appearance Criteria

Guidelines for identifying and avoiding the use of damaged screws during disassembly.

Appropriate Tools for Disassembly

Screwdrivers and Plastic Blades

Information on cross screwdrivers and plastic blades for screw handling and prying during disassembly.

Tweezers and Thickness Gauge

Guidance on using tweezers for cables and thickness gauges for gap measurement.

Bottom Case Module Removal

Remove Bottom Case

Step-by-step instructions for removing the bottom case, including screw locations, types, and prying techniques.

HDD Module Removal

Remove HDD Module

Procedure to disconnect the battery and remove the HDD module, noting essential precautions.

WLAN Module Removal

Remove WLAN Card

Steps to disconnect the antenna cable and remove the WLAN card by unscrewing it.

Battery Module Removal

Remove Battery

Steps to remove the battery, including screw removal and antenna arrangement advice.

SSD Module Removal

Remove SSD Module

Procedure to remove the SSD module by unscrewing it from its slot.

Thermal Assy & FAN Module Removal

Remove Thermal Assy & FAN

Instructions to disconnect the FAN cable and remove the thermal module by unscrewing it.

Memory Module Removal

Remove Memory Module

Steps to pop up and pull out the memory module by releasing four latches.

IO Board Removal

Remove IO Board

Procedure to disconnect IO FFC from MB and remove the IO board by unscrewing it.

HDD Board Removal

Remove HDD Board

Instructions to remove the HDD Board by unscrewing it from its mounting.

Motherboard Module Removal

Disconnect Cables from Motherboard

Steps to disconnect LVDS, Speaker, KB FPC, KB LED FPC, TP FFC, and FP FFC cables from the motherboard.

Remove Motherboard

Instructions to remove the Motherboard by unscrewing it from the chassis.

Speaker Module Removal

Remove Speaker Module

Procedure to take the speaker module away from the notebook.

Touchpad Module Removal

Remove Touchpad Module

Steps to disconnect FFCs, remove screws and mylar, and detach the touchpad module.

LCD Module Disassembly

Disassemble LCD Module

Steps to remove hinge caps, covers, bezel, panel, and disconnect cables.