Asus X99-A/USB 3.1 - PCH Configuration

ASUS X99-A/USB 3.1
3-35
Chapter 3
3.6.2 PCH Configuration
The following items appear only when you set the CPU states to [Enabled].
Enhanced C1 state [Enabled]
This item allows your CPU to reduce power consumption when the system
is in idle mode.
Conguration options: [Enabled] [Disabled]
CPU C3 Report [Enabled]
This item allows you to disable or enable the CPU C3 report to the
operating system.
Conguration options: [Enabled] [Disabled]
CPU C6 Report [Enabled]
This item allows you to disable or enable the CPU C6 report to the
operating system.
Conguration options: [Enabled] [Disabled]
Package C State Support [Auto]
This item allows you to set the a C-state support for the CPU package.
Conguration options: [Auto] [Enabled] [C0/C1 state] [C2 state] [C6 state]
[C6 (non Retention state] [C6 (Retention) state]
PCI Express Configuration
This item allows you to congure the PCI Express slots.
PCIEX16_2 Speed [Auto]
This item allows your system to select the speed for PCIe x16_2 slot. When set to
[Gen1], the PCI-E port runs at PCI-E 1.0 speed. When set to [Gen2], the PCI-E port
runs at PCI-E 2.0 speed.
Conguration options: [Auto] [Gen1] [Gen2]
PCIEX1_1 Speed [Auto]
This item allows your system to select the speed for PCIe x1_1 slot. When set to
[Gen1], the PCI-E port runs at PCI-E 1.0 speed. When set to [Gen2], the PCI-E port
runs at PCI-E 2.0 speed.
Conguration options: [Auto] [Gen1] [Gen2]
PCIEX1_2 Speed [Auto]
This item allows your system to select the speed for PCIe x1_2 slot. When set to
[Gen1], the PCI-E port runs at PCI-E 1.0 speed. When set to [Gen2], the PCI-E port
runs at PCI-E 2.0 speed.
Conguration options: [Auto] [Gen1] [Gen2]