Asus ZenWiFi BD4 - User Manual

ASUS ZenWiFi BD4
BE3600 Dual Band WiFi Router
Model: BD4
Quick
Start Guide
1
Plug the adapter into the DC port, and press the power button.
2
The power LED will light up when the hardware is ready.
Hardware Explanations
ZenWiFi BD4 Overview
2.5GbE port (WAN/LAN auto-detecting)
• Connect your optical modem to a 2.5GbE
port with a network cable.
• Connect your PC to a 2.5GbE port with a
network cable.
Before Setup
AiMesh Setup Steps
DC Power adapter DC Output: +12V with max 1.5A current
Operating Temperature 0~40
o
C Storage 0~70
o
C
Operating Humidity 50~90% Storage 20~90%
Specications:
One Router Setup Steps
Unplug
Prepare your Modem
01
1
Unplug the power of cable / DSL modem. If
it has a battery backup, remove the battery.
2
Connect your modem to the router with the network cable provided.
3
Power on the modem. Plug modem to the power outlet and power
on.
WE SUGGEST...
Modem back
Modem back
4
Check the modem LED lights to ensure the connection is active.
If you are using DSL for
internet, you will need your
username / password from
your Internet service provider
(ISP) to properly configure your
router.
Modem front
Connect your Device
02
1
Power on the router.
Plug in and press the power
switch at the back of your router.
2
Check that the LED turns solid
blue to indicate that the hardware
connection is ready for setup.
3
[Web] Connect your PC
to the router using an
additional network cable.
[App] Or you can use a
phone or pad to complete
the setup via ASUS Router
App.
Login and Connect
03
[Web]
1
Refer to ONE ROUTER SETUP STEPS to
connect your AiMesh router to your PC and
modem, and then log in into the web GUI.
AiMesh router
03
AiMesh router
Modem AiMesh node
Logout/Reboot
AiMesh Router
2
Go to Network Map page, click AiMesh icon and
then Search for your extending AiMesh node.
3
Click Search, it will automatically search for your
AiMesh node nearby. When the AiMesh node shows
on this page, click it to add it into the AiMesh
system.
** If you cannot find any AiMesh node, please go to
TROUBLE SHOOTING.
4
A message is displayed when synchronization
is completed.
5
Congratulations! You
will find the pages
below show up when an
AiMesh node has been
successfully added to
the AiMesh network.
Successfully added RT-ABCDE to your AiMesh
system, it will take awhile to show up as connected
in the AiMesh router list.
OK
[App] Log in to your existing router via ASUS Router App and choose “Add AiMesh Node” to complete the setup.
2.5GbE port x 2
Setting up an AiMesh WiFi system
02
1
Prepare two or more ASUS routers supporting AiMesh.
2
Assign one as AiMesh router, and another one as AiMesh node.
** If you have multiple AiMesh routers, we recommend using the router with the highest
specications as your AiMesh router and the others as AiMesh nodes.
3
Go to AiMesh SETUP STEPS.
Setting up a standalone router
01
1
Go to ONE ROUTER SETUP STEPS.
One Router Setup
Download free ASUS Router APP to
set up and manage your router(s)
03
AiMesh Setup Steps
AiMesh routerAiMesh node
Prepare
01
Place your AiMesh router and node in the same room and at least 1 meter apart during the setup process.
AiMesh node
02
Keep your AiMesh node powered on and standby for AiMesh system settings.
Power (DCIN) port
1
[Web] Open a web browser.
You will be redirected to the ASUS Setup Wizard. If not,
navigate to http://www.asusrouter.com.
[App] Launch ASUS Router App and follow the instructions
to complete the setup.
E23694
Power button
At least 1 meter
AiMesh node
AiMesh router
E23694_ZenWiFi_BD4_one-page_1PK_QSG.indd 1
E23694_ZenWiFi_BD4_one-page_1PK_QSG.indd 1
2024/6/17 15:06:23
2024/6/17 15:06:23

Asus ZenWiFi BD4 Specifications