Asus ZenWiFi ET8 User Manual

ASUS ZenWiFi ET8
AXE6600 Tri Band WiFi Router
Model: ET8
Quick
Start Guide
1
Plug the adapter into the DCIN port, and press the power button.
2
The power LED will light up when your hardware is ready.
Hardware Explanations
Button and Port Explanations
Power buttonDC-IN port
2.5G / 1G
WAN port
LAN ports 1-3 USB 3.0/2.0 port
2.5G / 1G WAN port
Connect your optical modem to this
port with a network cable.
LAN ports 1-3
Connect your PC to a LAN port with
a network cable.
Before Setup
ASUS Router App
AiMesh Setup Steps
Troubleshooting
1
Find two ZenWiFi ET8, and power both on.
2
Use a network cable to connect your optical modem to the WAN port of either ZenWiFi ET8.
This ZenWiFi ET8 will be the AiMesh router, and the other ZenWiFi ET8 will be the AiMesh
node.
3
The LED turns solid blue to indicate that ZenWiFi ET8 is ready for setup.
Preparing to set up an AiMesh WiFi system
AiMesh Setup Steps
AiMesh routerAiMesh node
Download free ASUS Router APP to set up
and manage your router(s).
AiMesh routerAiMesh node
within
3 meters
Prepare
01
Place your AiMesh router and node within 3 meters of each
other during the setup process.
AiMesh node
02
Keep your AiMesh node powered on and standby for AiMesh
system settings.
Enable Bluetooth on your phone. Launch ASUS Router APP, and then follow the on-screen
instructions to finish the AiMesh setup.
Enabling Bluetooth Launching ASUS Router APP
03 04
If your AiMesh router cannot find any AiMesh node nearby or
synchronization fails, please check the following and try again.
a
Move your AiMesh node closer to the AiMesh router ideally. Ensure that it is
within 3 meters.
b
Your AiMesh node is powered on.
DC Power adapter DC Output: +19V with max 1.75A current
Operating Temperature 0~40
o
C Storage 0~70
o
C
Operating Humidity 50~90% Storage 20~90%
Specications:
NOTE: When you’re using a wireless backhaul to connect your router
and AiMesh node, the WAN port on your AiMesh node can be
used as a LAN port providing up to 2.5G transmission speed.
E17882_ZenWiFi_ET8_One-page_2PK_QSG.indd 1
E17882_ZenWiFi_ET8_One-page_2PK_QSG.indd 1
2021/2/5 15:35:58
2021/2/5 15:35:58

Asus ZenWiFi ET8 Specifications

General

Wi-Fi Standard	Wi-Fi 6E (802.11ax)
Frequency Bands	2.4 GHz, 5 GHz, 6 GHz
Tri-band	Yes
Coverage	Up to 5500 sq. ft.
USB Ports	1 x USB 3.2 Gen 1
Memory	512MB RAM, 256MB Flash
Antenna	Internal antennas
Ports	1x 2.5G WAN, 3x Gigabit LAN
Processor	1.5 GHz
Security	WPA3
Mesh Technology	Yes
Weight	715 g (each unit)

Summary

Before Setup

Prepare AiMesh System Setup

Guides initial setup for AiMesh, including powering devices and connecting to the optical modem.

ASUS Router App Usage

Details downloading and using the ASUS Router App for router setup and management.

AiMesh Setup Process

Outlines the step-by-step AiMesh system setup, from preparation to app-guided configuration.

Hardware Explanations

Device Ports and Buttons

Explains the function of the DC-IN port, power button, LAN ports, USB port, and WAN port.

Technical Specifications

Lists key technical specifications for the ASUS ZenWiFi ET8, including power and operating conditions.

Troubleshooting

AiMesh Connectivity Issues

Provides steps to resolve AiMesh node detection or synchronization failures, suggesting proximity and power checks.

Relocation and Performance

Optimizing Router Placement

Recommends relocating AiMesh router and node for optimal performance and minimal interference.

LED Signal Indicators

Explains the meaning of solid white, yellow, and red LED lights for signal strength indication.

Frequently Asked Questions

Access Point Mode Support

Confirms support for Access Point mode and directs users to the administration GUI for configuration.

Wired AiMesh Connection

Explains how to set up a wired (Ethernet backhaul) connection between AiMesh routers for enhanced stability.

Regulatory and Safety Information

FCC Compliance Statement

Details FCC rules, operational conditions, and warnings regarding interference and modifications for compliance.

Health and Environmental Precautions

Covers safety notices for usage environments, power adapters, handling, and exposure to liquids or storms.

Canadian Compliance (ISED)

Provides compliance statements for Innovation, Science and Economic Development Canada, including RF exposure.