12
Never tilt the bucket all the way forward
to use the bucket as a dozer blade
(photo A). Damage to the bucket and
bucket cylinders can result.
Never back drag as shown in photo B as
damage to the machine, especially the
bucket and tilt cylinders, can result.
Operating on turf
ASV rubber track vehicles are designed
to tread lightly and produce minimal
ground disturbance while operating on
finished surfaces like turf, however, care
should be taken while operating on these
surfaces to prevent blemishes from
occurring.
Turning poses the greatest risk of sur-
face disturbance during operation.
Moving in a straight line across turf will
cause little or no disturbance, whereas
tight cornering will most likely cause
blemishes.
While working on turf, make gradual
turns. (see item C) If space is limited,
turn gradually by moving back and forth
until facing the desired direction. (see
item D)
MMAACCHHIINNEE OOPPEERRAATTIIOONN
B
C D
A
To Next Page
Loading...