How to fix the light inside my Atag Microwave Oven?
If the light inside your Atag Microwave Oven isn't working, it could be due to a couple of reasons. The lamp may be unusable, in which case you should change the bulb. Also, check if the oven is connected to the power supply or if the fuse has blown, and connect to power supply or change the fuse if needed.
Why is my Atag MC3211C Microwave Oven not heating up?
If your Atag Microwave Oven isn't heating, there are a few potential causes. First, check if the selected temperature is too low and raise it if necessary. Ensure the oven is properly connected to the power supply. Also, inspect the fuse and change it if it has blown, making sure the replacement is a 16A fuse. If none of these steps resolve the issue, there may be other underlying causes.
What to do if my Atag MC3211C Microwave Oven gives off sparks?
If your Atag Microwave Oven is giving off sparks, it could be due to a metallic element being too close to a wall or the rack. Remove any metal elements near the walls. Also, never use a metal element with the rack.
General| Installation | Countertop |
|---|---|
| Microwave power | 1000 W |
| Control type | Electronic |
| Number of Power Levels | 5 |
| Turntable Diameter | 31.5 cm |
| Color | Stainless steel |
| Type | Microwave with Grill |
| Capacity | 32 liters |
To Next Page
