EasyManua.ls Logo

Atag WS9111MR/A01 - Lighting

Atag WS9111MR/A01
84 pages
Go to English
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Loading...
EN 13
Removing the long life charcoal filter
Switch off the electricity! Remove the plug from the socket or switch off
the electricity at the mains.
Pull the panel (that holds the grease filter(s) of the CMV) downwards.
Push in the stud to release the recirculation grease filter, and tilt the
grease filter down toward you.
Behind the grease filter you can find the charcoal filter. Remove the
filter holder frame by turning the knobs (
*
) 90° that affix the chimney
to the cooker hood.
g
g
j
h
i
g
g
Important:
Saturation of the activated charcoal will eventually occur after more
or less prolonged use, depending on the type of cooking and how
frequently the grease filter is cleaned.
You can wash and reuse the carbon filter. Replace the mattress
every 3 years and when the cloth is damaged.
You can rinse out the mattress max. five times.
Lighting
Attention!
This hood is fitted with LED light! These have to be replaced by a
authorized technician. Do not attempt to replace LED light by yourself.
MAINTENANCE

Table of Contents

Related product manuals