EN 15
INSTALLATION
Electrical connections
This is an (insulation) class I appliance. The cable must be
connected to an earthed socket!
Check to make sure that the voltage specified on the type plate matches
the mains voltage.
The appliance must be connected to the mains as follows:
• BROWN = live
• BLUE = neutral
• YELLOW/GREEN = earth
This cooker hood is fitted with a plug. Install the cooker hood so that
the plug is accessible. It is preferable to fit the wall socket out of sight,
behind the chimney cover.
Note: when you make a fixed connection to the mains you must make
sure that the live wire is connected to an omnipolar switch with a break
contact distance of at least 3 mm.
To Next Page
Loading...
Need help?
General
