Appendix
88
Alert tones and lights
Screen icons
Battery status - battery is charging (animated display).
Battery status - low battery (ashing); place handset in
telephone base or charger to recharge.
Ringer o - the handset ringer is o.
ECO
The ECO mode activates automatically to reduce power
consumption when the handset is within range from the
telephone base.
New voicemail - you have new voicemail from your
telephone service provider.
ANS ON
Answering system on - the answering system is turned on
to answer calls.
NEW
New caller ID log or new message - new or missed calls, or
new message (during message playback).
MSG #
1/2
Message counter - number of message playing/total
number of messages.
Handset alert tones
1 short beep Tone of each key press, if key tone is turned on.
1 long beep Indication to begin recording a message, memo or announcement.
2 short beeps
You press qCID or pDIR on a cordless handset when the volume is
already at its highest or lowest setting.
-OR-
Call waiting tone or error tone.
Conrmation tone
(3 rising tones)
The system has completed the command successfully.
4 beeps The other party has ended your intercom call.
-OR-
The handset has gone out of range from the base during a call.
4 short beeps Low battery warning.
Telephone base tones
Beeps every 10 seconds Message alert.
Fast ringer tone
You are setting the ringer volume by pressing the q/VOL/p keys
on the telephone base.
Long beep Indicates the start of message recording during call screening or
the end of a message playback session.
4 short beeps Registration failure tone.
NEW
ECO
10:30
PM
ANS ON
MSG #
1/2
To Next Page
Loading...
