6
Screen display Function Options
# OF RINGS
Set how many times the telephone rings before the
answering system picks up the call.
If you choose tS 2-4 (or tS 4-6), the answering
system answers after two (or four) rings when
there are new messages. When there are no new
messages, the answering system answers after four
(or six) rings. When you are retrieving messages from
a long distance call, it disconnects your call after
three (or five) rings to avoid long distance charges.
(These tS settings are also known as toll saver.)
Refer to To set the number of rings on page 17 for
details.
2, 3, 4*, 5, 6, 7,
tS 2-4, tS 4-6
MESSAGE ALERT Set whether there is an audible message alert every 15
seconds when there are new messages.
ON
OFF*
REMOTE CODE Select a three-digit number to allow remote access
from another telephone (away from your home or
office).
Refer to Remote access in the user’s manual for
details.
500*
PRIORITY CODE Select a three-digit number as your priority code
for the answering system. If the answering system
answers a call and the caller enters this priority
code, then the telephone plays a 30-second tone to
alert you to a priority caller.
Refer to Priority call in the user’s manual for details.
999*
CALL SCREENING
Choose whether incoming messages are played
through the speaker while they are being recorded.
Refer to Call screening in the user’s manual for
details.
ON*
OFF
Feature summary
To Next Page
Loading...
