For more detailed instructions, please refer to the Abridged user’s manual
provided in your package, or for a full set of installation and operation
instructions, refer to the online CL81114/CL81214 DECT 6.0 cordless
telephone with caller ID/call waiting Complete user’s manual at
www.telephones.att.com/manuals.
For customer service or product information, visit our website at
www.telephones.att.com or call 1 (800) 222-3111. In Canada, dial
1 (866) 288-4268.
© 2014 Advanced American Telephones. All Rights Reserved.
AT&T and the AT&T logo are trademarks of AT&T Intellectual Property licensed to
Advanced American Telephones, San Antonio, TX 78219.
Printed in China. Issue 1.0 AT&T 12/14.
Caller ID
This product supports caller ID services offered by most telephone service providers.
The telephone stores caller ID information for the last 50 incoming calls. This
information is common to all handsets.
Missed call indicator
When a handset is in idle mode and has new or missed calls, its screen shows
XX Missed calls.
You can erase the missed call indicator either by reviewing the call log one by
one, or by pressing and holding on the handset in idle mode.
Review and dial a number in the call log
1. in idle mode -> or to scroll through the list.
2. or to call when the desired entry is displayed.
Call block
If you have subscribed to caller ID service, you can use the call block feature to
reject certain calls automatically. The call block list can store up to 20 entries.
This feature is only available on the cordless handset.
Operation Steps
Adding a call
block entry
1. -> or -> Call block -> .
2. to select Block list.
3. or -> Add new entry -> .
4. Enter a telephone number up to 30 digits -> .
5. Enter a name up to 15 characters -> .
Blocking calls
without number
1. -> or -> Call block -> .
2. or -> Calls w/o num -> .
3. or to choose Not block or Block -> .
Directory
The directory can store up to 50 entries, which are shared by all system handsets.
Operation Steps
Adding an entry
1. .
2. or -> Directory -> .
3. or -> Add contact -> .
4. Enter a telephone number up to 30 digits -> .
5. Enter a name up to 15 characters -> .
Searching/dialing
an entry
1. in idle mode.
2. Press or to browse through the directory, or
press the dialing keys (0-9) to start a name search.
3. Press or to call.
To Previous Page
Loading...
Need help?
General
