Need help?Do you have a question about the AT&T CL82214 and is the answer not in the manual?
General| Brand | AT&T |
|---|---|
| Model | CL82214 |
| Type | Cordless Telephone |
| Number of Handsets | 2 |
| Answering System | Yes |
| Caller ID | Yes |
| Call Waiting | Yes |
| Speakerphone | Yes |
| Backlit Display | Yes |
| Expandable | Yes |
| Standby Time | Up to 5 days |
| Frequency | DECT 6.0 |
| Range | Up to 1000 feet |
| Battery Type | Ni-MH |
| Handset Locator | Yes |
| Maximum number of handsets supported | 12 |
| Phonebook Capacity | 50 |
| Battery Life | Up to 10 hours |
Connect power and telephone lines to the base and charger.
Install and charge the handset battery for initial phone use.
Guide for mounting the telephone base on a wall.
Adjust ringer volume and select from ten different ring tones.
Configure date, time, and display language for the handset.
Enable or disable voice announcements for incoming callers.
Basic procedures for handling telephone calls.
Using the speakerphone and last number redial functions.
Adjust call volume and mute the microphone during a call.
Managing multiple handsets and using the intercom feature.
Storing, searching, and dialing contacts via the directory.
Managing caller ID information and blocking unwanted calls.
Configure announcements, answer on/off, and voice guide.
Listen to, skip, repeat, and delete recorded messages.
Control answering system functions remotely via phone.
Solutions for common problems like no dial tone or battery issues.
Important safety precautions, regulatory compliance, and warranty.
To Next Page
