Telephone operation
28
Options while on calls
Blind transfer
While on an outside call, you can transfer the call to a specific device or any
device without notifying them.
To transfer an outside call directly without notifying the desired device:
1. During the call, press MENU/SELECT.
2. Press MENU/SELECT again to choose Transfer.
If you have a two-handset system and no other
registered devices, the outside call is put on hold and
your handset shows Transferring call... The other
handset rings and shows Transfer from other handset.
If you have other registered device(s) or more than
two handsets, your screen shows TRANSFER TO: Use
the dialing keys to eenter a specific device number (1-9
for handsets 1-9, TONE followed by 0-2 for handsets
10-12, or TONE followed by # for all devices), or
press qCID or pDIR to scroll to the desired device and
press MENU/SELECT. The outside call is put on hold
and your handset screen shows Transferring call... or
Transferring call to all... The other device rings and
shows Transfer from HANDSET X (HANDSET represents the handset
name, X represents the handset number).
3. To answer the call on the destination handset, press, press PHONE/FLASH,
/SPEA�ERSPEA�ER, or any dialing key (0-9, TONE or #). The initiating handset
shows Call transferred and goes to idle mode.
NOTES:
To cancel the transfer and return to the external call before the blind transfer call is answered,
press OFF/CANCEL, PHONE/FLASH or /SPEA�ERSPEA�ER on your handset.
If the other device does not answer the transfer within 30 seconds, the transfer ends and the
initiating device rings while showing No response to transfer. If it does not pick up within 30
seconds, the device returns to idle mode and the outside call ends.
•
•
•
•
Phone 0:00:12
6:30
AM
8/06
>Transfer
Intercom
TRANSFER TO:
>Handset 2
To Next Page
Loading...
Need help?
General
