Answering system
84
About the answering system
Call screening
To screen a call at the telephone base:
If the answering system and call screening are on (see Call
screening on page 58), the announcement and the incoming
message broadcast at the telephone base when a call is answered
by the answering system.
Options while a message is being recorded:
Press VOLUME or VOLUME on the telephone base to adjust
the call screening volume.
Press
/PLAY/STOP to temporarily silence the call screening.
Press /PLAY/STOP to temporarily turn on the call screening
if call screening is set to off.
To screen a call at the handset:
While a message is being recorded, the handset shows
To screen call, press [SELECT]. Press
MENU/SELECT to screen the
call.
Options while a message is being recorded:
Press
CID/VOLUME or DIR/VOLUME on the handset to adjust
the call screening volume.
Press
OFF/CANCEL to temporarily silence the call screening.
Press MENU/SELECT to temporarily turn on the call screening if
call screening is set to off.
Press /SPEAKERSPEAKER to broadcast the announcement and the
incoming message through the speakerphone. Press again to turn
off the speakerphone.
•
•
•
•
•
•
•
To Next Page
Loading...
Need help?
General
