Multiple handset use
39
Answer an incoming call during an intercom call
If you receive an outside call during an intercom call, there is a
two-beep call waiting tone.
To answer the call, press
PHONE/FLASH. The intercom call ends
automatically. The party on the intercom call hears four beeps.
Other system devices can also answer the incoming call by
pressing
PHONE/FLASH or /SPEAKERSPEAKER.
To end the intercom call without answering the incoming call,
press
OFF/CANCEL on the handset.
•
•
Intercom
NOTES:
Before the intercom call is answered, you can cancel it by pressing
OFF/CANCELCANCEL.
if the called party does not answer within 100 seconds or if the handset is in use, on
a call or out of range, the initiating device shows No answer. Try again.
To temporarily silence the intercom ringer, press
OFF/CANCEL or MUTE/DELETE.
You can only use one pair of handsets at a time to make intercom calls.
•
•
•
•
To Next Page
Loading...
